In precision optical assembly, one practical problem is unavoidable: several lenses may be mounted inside the same barrel, and each theoretically has its own optical axis. In reality, all axes cannot coincide perfectly.
Manufacturing and assembly errors give every lens a small amount of tilt or decentration. A single element may be offset by only a few micrometers—an amount that is difficult to see by eye. When several lenses are stacked together, however, the errors accumulate and can shift the system axis enough to affect imaging performance.
To address this problem, optical engineers use a core concept called the best-fit optical axis.
What is the best-fit optical axis?
Two concepts must be distinguished first: the optical axis and the best-fit optical axis.
Optical axis
The optical axis is the ideal axis of central symmetry for an optical lens. Light traveling along this line through the lens should not be laterally deviated by decentration. It is a virtual line commonly defined by the centers of curvature of the optical system’s refracting or reflecting surfaces, and it serves as the reference for light propagation and system symmetry.
Best-fit optical axis
A centration measurement system measures the complete coordinates of each spherical surface center in a defined coordinate system. Multiple measured center coordinates are then fitted to create a virtual line.
This line does not force the optical axis of one selected lens to become the standard. Instead, it represents the “average” or “optimal” central axis of the actual light path through the complete optical system, minimizing the sum of the combined deviations of all lens axes from that line.
How is the best-fit optical axis aligned?
In industrial optical assembly, a centration measurement system—also called a centration tester—is commonly used for this precision process. The workflow has four steps.
Step 1: Enter parameters and mount the assembly
Mount the multi-element lens assembly securely on the centration system’s high-precision rotary stage. Enter the design values for radius of curvature, center thickness, and other required parameters in the control software to establish the measurement reference.
Step 2: Measure each surface and calibrate zero
Start the measurement routine and observe the crosshair image at the image-acquisition position. Make fine adjustments until the crosshair is clear and the zero position is found.
The instrument then measures the centration data for each optical surface in sequence, accurately capturing the spatial position of every spherical surface.
Step 3: Calculate the best-fit optical axis
After data acquisition, select the software’s Best Axis function. The system combines the measurement data from all surfaces and calculates an optimized virtual axis using algorithms such as least-squares fitting. This axis provides the critical reference for subsequent precision alignment.
Step 4: Fine adjustment, remeasurement, and minimum residual
This is a critical step. Use the deviation data calculated by the software to adjust the lens mounts or individual lens positions so that the assembly is aligned to the virtual best-fit optical axis.
- Global alignment: minimize decentration and tilt of all lenses relative to the overall virtual optical axis.
- Local correction: make local adjustments to individual lenses with the largest deviations.
- Remeasurement verification: measure the assembly again and ensure that the overall residual relative to the virtual axis is minimized and meets the assembly specification.
The core of multi-element lens alignment is to calculate the best-fit optical axis accurately with a centration system and use it as the assembly reference. Aligning all lenses to that virtual axis minimizes the overall residual and supports the required assembly accuracy and imaging quality.
Conclusion
Optical engineers use the best-fit optical axis to work against errors at the micrometre level. It is like an invisible skeleton inside the lens: although it cannot be seen, it determines how clearly the light can ultimately converge.
In semiconductors, high-end lens manufacturing, and other demanding fields, this pursuit of optical-axis precision is exactly where precision optical inspection technology creates its value.
Working with a complex lens assembly? Explore our optical alignment approach or compare centration measurement systems.
Frequently asked questions
How is the best-fit optical axis calculated?
The system measures the positions of multiple surface centers of curvature and fits a virtual line through the resulting data, commonly with a least-squares method, so that the aggregate residual is minimized.
Is the best-fit axis the same as one lens element’s optical axis?
No. It is a system-level reference calculated from the complete measured assembly. It may not coincide exactly with any individual lens axis.
Does alignment end after the first best-fit calculation?
Usually not. The assembly is adjusted according to the calculated deviations and then remeasured. This iterative process continues until the specified residual limits are met.