21 October 2026

Transmitted vs. Reflected Centration Measurement: What’s the Difference?

Compare transmitted and reflected centration measurement by working principle, information provided, accuracy considerations, material requirements, and production role.

Transmitted and reflected centration measurement describe two different views of optical misalignment. One evaluates the combined result after light passes through an optical system; the other measures individual surfaces from their reflected images. The correct choice depends on the production stage and the information required.

In precision optics, an assembled lens that fails imaging requirements, has blurred image edges, or shows uneven MTF often traces back to center deviation. When lenses, mirrors, and other optical components are assembled, each optical axis must remain sufficiently close to the system reference axis.

There are two common forms of centration error: transmitted centration error and reflected centration error.

Optical lens mounted for centration measurement

What is centration error in optics?

Centration error—also called eccentricity or decentration—is the misalignment between an optical element’s axis and the system’s reference axis.

Core difference: transmitted vs. reflected

Two mainstream methods are used to inspect centration error. Their main difference is whether the measurement evaluates the combined transmitted result or the reflected image of an individual surface.

1. Transmitted centration error

Definition: When light passes through a transparent optical element, its surface curvature centers and optical axis may not coincide with the system reference axis. As a result, the transmitted image point, focal point, or image-side principal point shifts away from the ideal optical axis.

Causes: Lens manufacturing errors such as thickness variation or inconsistent radius of curvature, mounting errors, and differences in optical material.

Typical applications: Photographic objectives, microscopes, telescopes, camera lenses, and other transmitted-light imaging systems, where transmitted centration error must be tightly controlled or corrected during assembly.

Transmitted light path through a centered lens system

Limitations: The result is an aggregate effect from the complete optical path. Compensating errors can create a blind spot often described as false centering, and opaque materials cannot be measured by transmission.

Advantages: Measurement can be completed in one setup with high efficiency, it evaluates the combined result of the complete optical system, and it is suitable for fully transparent optical materials.

2. Reflected centration error

Definition: When light reflects from an optical surface, misalignment between that surface’s center of curvature and the system reference axis causes the reflected image point to move away from its ideal position. Unlike a transmitted result, reflected measurement represents the true centration error of an individual surface rather than the aggregate effect of the complete lens.

Causes: Small deformation of a reflective surface, mounting tilt, contamination on the optical surface, and other conditions that change the direction of reflected light.

Typical applications: Reflective optical systems including reflecting telescopes, laser rangefinders, reflective projection systems, aspheric surface alignment, and multi-element optical assemblies.

Reflected light path from individual optical surfaces

Limitations: Individual-surface measurement is sensitive to assembly and fixture errors, requires a high-precision mechanical system, is affected by environmental conditions, and has a higher operating skill requirement.

Advantages: Surface-by-surface inspection avoids some of the misjudgment risks of transmitted measurement, can be used with a broad range of materials when the illumination waveband is suitable, and provides high sensitivity to surface-center position.

Summary of the difference

Both forms of centration error can introduce coma, astigmatism, and other asymmetric aberrations. They increase alignment and calibration difficulty and can ultimately cause image distortion, loss of sharpness, or ghosting.

Transmitted and reflected inspection share the same basic measurement reference and decision logic, but view the light from different directions: transmission evaluates how far the complete lens causes the final image to deviate, while reflection evaluates how far an individual surface is offset from the reference axis.

Consideration Transmitted measurement Reflected measurement
What is measured The combined optical offset after light passes through the system The centration error of an individual optical surface
Measurement output An aggregate result for the complete optical path Surface-level data relative to the reference axis
Main strength Fast, one-setup evaluation of the complete system High sensitivity and direct localization of an abnormal surface
Main limitation Compensating errors can create false centering; the material must transmit the measurement wavelength Greater dependence on fixture quality and mechanical-reference accuracy
Typical role Batch screening and overall system evaluation Precision alignment, fault isolation, and surface-by-surface verification

Application scenarios: complementary, not mutually exclusive

Transmitted and reflected centration systems should be selected according to the production task rather than treated as competing alternatives.

  • Transmitted centration systems provide fast, efficient overall screening and are suitable for batch incoming inspection.
  • Reflected centration systems precisely locate an abnormal surface and are suitable for high-precision inspection and fault diagnosis.
  • The two approaches can be combined to balance throughput and accuracy.

Recommended measurement approach by application

  • Surface-by-surface inspection of singlets or cemented lenses: reflected measurement.
  • Overall evaluation of an assembled lens: transmitted measurement for initial screening, followed by reflected measurement for precision inspection.
  • Infrared or ultraviolet lenses: reflected equipment configured for the corresponding measurement waveband.
  • Centering turning process: dual-path reflected measurement to inspect the front and rear surfaces in one setup.
Multiple optical elements prepared for centration inspection
Complex multi-element imaging objective
Assortment of optical filters and lens elements
Lens surface positioned under a precision measurement probe

For complex multi-element systems, reflected surface data can also feed a best-fit optical axis analysis to support precision alignment.

Conclusion

Neither transmitted nor reflected centration inspection is universally better. The key is to understand the measurement principle, select the correct method, and apply it to the right production stage.

As high-resolution sensors and large-aperture lenses become more common, centration accuracy requirements continue to increase. Accurate manufacturing and assembly processes, reliable inspection methods, and high-quality optical materials all help reduce transmitted and reflected centration errors.

Need to compare both approaches for your lens assembly? Explore our centration measurement systems or discuss your application with our engineering team.

Frequently asked questions

Is reflected centration measurement always more accurate than transmitted measurement?

Not necessarily. It provides surface-level information and can avoid some aggregate ambiguity, but its results depend strongly on fixture quality, mechanical-reference stability, and measurement conditions.

Can transmitted measurement identify which lens surface is misaligned?

Usually it cannot isolate a single surface because the result combines the effect of the complete optical path. Reflected surface-by-surface measurement is normally used for fault isolation.

Why can transmitted measurement show false centering?

Errors from different surfaces or assembly positions may partially cancel one another, producing an acceptable transmitted result even though individual surfaces remain misaligned.